Note: the following information is for the SIC2 console. It does not pertain to the SIC1 console. If you have a SIC1 console, please see the related article: How to save and import custom SIC1 console settings.

If you are setting up a studio or gym with multiple bikes that will all use the same console settings, you can export the console configuration settings to upload them to all bikes to save time.


The following custom console settings can be saved to a USB drive:

  • Stage Display Hold
  • Gear Profile
  • Custom Profile
  • Units
  • LCD Brightness
  • LCD Contrast
  • Button LEDs Brightness
  • Stage Metric Power
  • Stage Metric Cadence
  • Auto Pause
  • HR Bins
  • Fast Charge RPM


Console button guide

Use the RIDE and END buttons to scroll through the menu, and the STAGE button to select a menu item.


How to save the SIC2 console settings

The custom console settings are saved in an SIC2_Config.json file format.

  1. Activate the console by pressing any button.
  2. Press and hold the RIDE and END buttons for 5 seconds to enter the Settings menu.
  3. Use the RIDE and END buttons to scroll to System, then press STAGE to select it.
  4. Scroll to Config File, then press STAGE to select it.
  5. Scroll to Save, then press STAGE to and select it.
  6. Insert the USB stick into the back of the console.
  7. On the Save Config File to USB screen, scroll to Yes, then press STAGE to select it.
  8. If the custom console settings are imported successfully to the console, the word SUCCESS will appear in the message banner.


How to import the SIC2 console settings

  1. Activate the console by pressing any button.
  2. Press and hold the RIDE and END buttons for 5 seconds to enter the Settings menu.
  3. Use the RIDE and END buttons to scroll to System, then press STAGE to select it.
  4. Scroll to Config File, then press STAGE to select it.
  5. Scroll to Import, then press STAGE to select it.
  6. Insert the USB stick that contains the SIC2_Config.json file saved on it, into the back of the console.

  7. If the custom console settings are imported successfully to the console, the word SUCCESS will appear in the message banner.


For additional information, please refer to the Stages SIC2 console user guide.