Note: the following information is for the SIC1 console. It does not pertain to the SIC2 console. If you have a SIC2 console, please see the related topic: How to set the bike number on the SIC2 console.
To communicate properly, a paired console and sensor must be mounted to the same exercise bike. To make sure that the correct console stays with the correct sensor and exercise bike, you can assign an identification number to the console that matches the identification number of the exercise bike. Due to this, it is strongly recommended that each exercise bike in a fitness club be numbered for easy identification.
If there is a communication problem between the console and the sensor, you can view the bike number and make sure that the console is attached to the correct exercise bike.
Console button guide
Use the BACKLIGHT or AVG/END buttons to scroll through the menu, and the STAGE button to select a menu item.
To assign the bike number
- Activate the console by pressing any button.
- Press and hold the BACKLIGHT and AVG/END buttons for 5 seconds to enter the SETTINGS menu.
- Use the BACKLIGHT or AVG/END buttons to scroll to BIKE #, then press the STAGE button to select.
The bike number assigned to the console will appear in the message banner.
- To assign a bike number from 1 to 99 to the console, press the AVG/END or BACKLIGHT button to scroll to the desired bike number.
- Press the STAGE button to confirm your selection.
- To return to the previous menu, scroll to BACK, then press the STAGE button. Repeat this step until you return to the USB menu.
How to view the bike number
- Activate the console by pressing any button.
- Press and hold the STAGE and AVG/END buttons.
The bike number assigned to the console will appear in the message banner for as long as the buttons are held.