To pair the power meter with the LMVB tablet:

1. On the LMVB tablet main screen, tap on HELP.
   
2. Tap the bottom left corner of the HELP screen 10 times.
   
3. Under the SETTINGS tab, toggle Bluetooth to ON (green).
   
4. Tap on the POWER METER tab.
   
5. Locate the ANT+ ID number on the side of the power meter on the left crank of the LMVB. Rotate the crank to ensure it is awake.
   
6. Tap on PAIR POWER METER to show the available power meters.
   
7. Locate the ANT+ ID number for your power meter, then tap on the number to connect.
   
8. Once the power meter connects, a green checkmark will appear next to the ANT+ ID. Tap on OK.
   
9. Tap on the X to close the window.
   
10. Tap on the BACK ARROW to return to the main screen.
    

Take this opportunity to ensure the power meter firmware is up to date and change the power meter batteries if needed.

Firmware Updates using the StagesPower app

Changing the batteries in the Stages Power meter (971-0100 & 971-0101)

Changing the batteries in the Gen. 3 Stages indoor power meter (971-0103)