1. Plug in the power adapter and allow the screen to initialize.
  2. After the tablet boots up, the welcome screen will appear. Tap on the DEVISE SETUP button.
  3. Be sure the power meter is installed on the bike and batteries are installed in the power meter. Locate the ANT+ ID number on the side of the power meter on the left crank.
  4. Rotate the crank to ensure it is awake.
  5. Scroll through the list to locate the ID number of the power meter. Tap on the CONNECT button associated with that ID number.
  6. Tap on the OK button. The connection to the power meter will be confirmed by the green check mark and the word PAIRED.
  7. Tap on the NEXT button.
  8. Tap on the name of the Wi-Fi network you want to use to capture the Solo license.
  9. Tap on the field beneath the word PASSWORD and type the password for the Wi-Fi network using the keyboard on the screen. Tap on the JOIN button
  10. Tap on the OK button. The green check mark and the word CONNECTED will appear when the Solo tablet is connected to the network. The WWW globe will turn green when the tablet is connected to the internet and able to receive downloads.
  11. Tap on the NEXT button.
  12. Type in the Club Admin email address and password assigned to your location. Tap on the ENTER key.
  13. Tap on the SIGN IN button.
  14. Review the Stages Solo Privacy Policy, then tap on the I AGREE button.
  15. Locate the license for your Solo bike and tap on the ACTIVATE button. Note: There is one license per tablet. If the club has more than one Solo bike, the screen will show all available licenses.
  16. Tap on the ACTIVATE button. The green check mark and the word ACTIVATED will appear when the Solo tablet license is activated.
  17. Tap on the FINISH SETUP button. The Solo tablet main screen will appear and your Solo bike is ready to use.


If you need additional assistance, please start a support ticket.