To pair the power meter with the LMVB tablet:

  1. On the LMVB tablet main screen, tap on the HELP button.

  2. Tap the bottom left corner of the HELP screen 10 times.

  3. Under the SETTINGS tab on the ADMIN page, be sure that Bluetooth is set to “On”.

  4. Tap on the POWER METER tab.

  5. Locate the ANT+ ID number on the side of the power meter on the left crank of the LMVB. Rotate the crank to ensure it is awake.

  6. Tap on the PAIR POWER METER button to show the available power meters.

  7. Locate the ANT+ ID number for your power meter and tap on the number to connect.  

  8. When the connection is established, a green check mark will appear next to the ANT+ ID.


  9. Tap on the OK button.

  10. Tap on the X button to close the window.

  11. Tap on the BACK ARROW to return to the main screen.

This is a good opportunity to ensure the power meter firmware is up to date and change the power meter batteries, if needed.

Firmware Updates using the StagesPower app

Changing the batteries in the Stages Power meter