For Stages Indoor Cycling bikes equipped with a Stages Power meter, it is possible to record your power data directly into the fitness app of your choice. Most of these same apps can be paired to a heart rate strap as well, but please note compatibility will vary based on the app you are using, as many may require a Bluetooth 4.0-enabled strap (while the console itself can connect with either ANT+ or Bluetooth compatible straps). 


The Stages Power meter broadcasts your data via two unique wireless connections, Bluetooth 4.0 and ANT+. For each app, please note whether it requires Bluetooth 4.0 or ANT+, as many devices may need a plug in adapter to connect with ANT+. For Bluetooth 4.0 compatible apps, the power meter can be connected directly without the use of any adapters.


For a list of mobile devices with built in ANT+ capabilities, please use the ANT+ Directory found here and select "Mobile Phones/Devices" from the Categories menu. These devices can use ANT+ to pair to a Stages Power meter as well as an existing ANT+ compatible HR strap without the need for any adapters. 


Note: In a group environment with many active sensors, it may be difficult to pair to the correct bike in the first attempt due to competing Bluetooth signals. It may be advisable to bring a USB drive as a back up means to record data in case the connection with the correct power meter is not obtained before the start of your workout. 



Android apps


CycleBike+ (ANT+)

Use in trainer mode for indoor cycling classes. Gives the option to "spoof" location, as it does provide GPS data. App can connect to the power meter and an ANT+ heart rate strap.


Pairing:

Hit Menu > ANT+ Settings > ANT+ Devices > Power Sensor > Pair > Pick power meter based on ID # that matches the bike > Name Bike > Save. Repeat steps 1-3 and select Heart Rate Sensor to add a HR strap.

Tip: Select "Proximity" > Check Enable > Set and set it to a short distance to eliminate app from finding all power meters in the room


Selfloops (ANT+)

This app is designed around indoor cycling and group fitness applications, as well as GPS based outdoor activities, with compatibility for ANT+ Power meters and ANT+ and Bluetooth Heart Rate Sensors.

Pairing:
From the home screen select Sensors > Power sensor and wait for it to display "Connected"


Wahoo Fitness (Bluetooth 4.0, ANT+)

This multifunctional app for cycling and running can be used both indoors and out. It can connect to both Bluetooth and ANT+ sensors (on devices with built in ANT+ or an ANT+ adapter). Make sure to select "Indoor Cycling" when riding indoors to disable the GPS portion.

Pairing:
From the home screen, touch the wireless sensor icon in the top right corner > "+" symbol > Hold your device close to the crank arm > Select the "Stages Power" from the Device discovery list with the most green bars (Pairs based on proximity) > Save Device > Select "Indoor Cycling" from the "Use with workouts" list > OK. Use this same screen to add your heart rate sensor if applicable.
Note: App does not display or confirm the ANT+ ID from your power meter, so please ride and verify that you have connected to the correct power meter before beginning to record your ride.



iOS apps


Garmin Fit (ANT+)


iBiker (ANT+)


Kinomap Trainer (Bluetooth 4.0, ANT+)


Turbo Trainer (ANT+)


Velo-Trainer (Bluetooth 4.0, ANT+)

Subscription requires for full services. This app is based around both indoor cycling classes and home trainer use, with direct linking to Training Peaks and Strava to upload and track workouts.


Wahoo Fitness (Bluetooth 4.0, ANT+)

This multifunctional app for cycling and running can be used both indoors and out. It can connect to a variety of Bluetooth 4.0 sensors and ANT+ devices with the Wahoo ANT+ Key.  Make sure to select "Indoor Cycling" when riding indoors to disable the GPS portion.


Pairing

From the app home screen, touch the "Sensors" icon in the lower left corner > + Add New Sensor > Select Stages Power > Save Sensor